Dip Switches - Resol VBus /PWM Montageanleitung

VBus /PWM interface adapter
®

5. DIP switches

Relay 1
Relay 4
Relay 7
Relay 10
Relay 13
Relay 16
14
|
The adjusted relay transmits information on pump speed
which is then converted into a corresponding signal. The
relay is selected by means of the DIP switches. Each relay is
characterised by a certain position of the switches.
Î put the DIP switches in the position appropriate for
the desired relay.
The following table shows the position of the DIP switches
for each relay,
Relay 2
Relay 5
Relay 8
Relay 11
Relay 14
During normal operation, the relay addressed will be dis-
played by the 7-segment-display. See chap. 6.2.
Relay 3
Relay 6
Relay 9
Relay 12
Relay 15