Axis Q1942-E Bedienungsanleitung Seite 34

AXIS Q1942-E Thermal Network Camera
AXIS Video Motion Detection
4. From the Trigger drop-down list, select Applications and then select VMD 3.
5. Configure other settings as required. For example, to only record video during certain time periods, select a Schedule.
6. Under Actions, select Record Video from the Type drop-down list.
7. Select the stream profile and storage device to use and configure the pre- and post-trigger times.
8. Make sure that the rule is enabled and then click OK.
Note
To appear in the Trigger list, the application must be started and its status must be Idle or Running.
34