Output Buttons - Axis Q1942-E Bedienungsanleitung

AXIS Q1942-E Thermal Network Camera
Configure the Live View Page
activate external devices connected to the product, or they can link to a web page. Custom links defined as cgi links will run the
script in the background, in a hidden frame. Defining the link as a web link will open the link in a new window.

Output Buttons

External I/O devices connected to the Axis product's output ports can be controlled directly from the Live View page.
Note
To enable this setting at least one I/O port must be configured as an output port. See I/O Ports on page 53.
To display output buttons in the Live View page:
1. Go to Setup > Live View Config.
2. Under Output Buttons, select the type of control to use:
- Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60
seconds.
- Active/Inactive displays two buttons, one or each action.
To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port's Normal state.
For more information about I/O ports, see I/O Ports on page 53.
Note
An Axis multicable is required when connecting external I/O devices to the Axis product. See Axis multicable on page 56
26