Sync-Transceiver
English
Range of Application
The Sync-Transceiver converts a fibre optic signal to a DC 24-V signal. It is provided with
one FO input channel and one DC 24-V output channel.
The device is used to convert and transmit signals for the synchronization of the SIMEAS R/
R-PMU real-time clock.
A power supply is integrated in the housing to generate the voltage required for the converter
board from the power supply.
Characteristics
The housed Sync-Transceiver is a hard-wired and tested functional unit. It is provided with
a snap-on mounting for a 35 mm top-hat rail according to DIN EN 50022. Lines for the power
supply (contacts + L, - L) and the Sync signal (one twin contact each for output + and output
-) can be safely connected to 2-pin screw terminals. The FO channel is adapted using an ST
connector (bayonet lock).
E50417-K1074-C294-A2
27