Candy Watch-Touch Bedienungsanleitung Seite 2

Safety Indications
• WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot
parts.
•WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a
safe distance.
•WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of
electric shocks.
•WARNING: in order to avoid any danger caused by the accidental resetting of the thermal interruption
device, the appliance should not be powered by an external switching device, such as a timer, or be
connected to a circuit that is regularly switched on and off.
•Children under 8 should be kept at a safe distance from the appliance if not continuously supervised.
•Children should not play with the appliance. The appliance can be used by those aged 8 or over and by
those with limited physical, sensorial or mental capacities, without experience or knowledge of the
product, only if supervised or provided with instruction as to the operation of the appliance, in a safe way
with awareness of the possible risks.
•Cleaning and maintenance should not be carried out by unsupervised children.
•Do not use rough or abrasive materials or sharp metal scrapers to clean the oven door glasses, as they
can scratch the surface and cause the glass to shatter.
•The oven must be switched off before removing the removable parts and, after cleaning, reassemble
them according the instructions.
•Do not use a steam cleaner.
•Put the plug into a socket equipped with a third contact which corresponds to the earth and which must
be connected and in operation. For models without a plug, attach a standard plug to the cable that is able
to bear the load indicated on the tag. The earth conductor is yellow-green in colour. This operation should
be carried out by a suitably qualified professional. In case of incompatibility between the socket and the
appliance plug, ask a qualified electrician to substitute the socket with another suitable type. Connection
to the power source can also be made by placing an omnipolar breaker between the appliance and the
power source that can bear the maximum connected load and that is in line with current legislation. The
yellow-green earth cable should not be interrupted by the breaker. The socket or omnipolar breaker used
for the connection should be easily accessible when the appliance is installed.
•If the power cable is damaged, it should be substituted with a cable or special bundle available from the
manufacturer or by contacting the customer service department.
If the cable is damaged, replace it promptly in accordance with the following instructions:
- open the cover of the terminal block;
- remove the power cable and substitute it with a similar cable which is compatible with the appliance
(type H05VV-F, H05V2V2-F).
•This operation should be carried out by a suitably qualified professional. The earth conductor (yellow-
green) must be approximately 10 mm longer than the other conductors. For any repairs, refer only to the
Customer Care Department and request the use of original spare parts.
•Failure to comply with the above can compromise the safety of the appliance and invalidate the
guarantee.
•Any excess of spilled material should be removed before cleaning.
• A long power supply failure during an occuring cooking phase may cause a malfunction of the monitor. In
this case contact customer service.
EN 02