Installation - ASROCK K7S41GX2 Installationsanleitung

2. Installation

K7S41GX2 is a Micro ATX form factor (9.6-in x 7.8-in, 24.4 cm x 19.8 cm)

motherboard. Before you install the motherboard, please study the configura-

tion of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard compo-

nents or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also re-

member to use a grounded wrist strap or touch a safety grounded object

before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that comes with the component.

Before you install or remove any component, ensure that the

power is switched off or the power cord is detached from the

power supply. Failure to do so may cause severe damage to

the motherboard, peripherals, and/or components.

ASRock K7S41GX2 Motherboard

9 9 9 9 9