Werbung
Thermo Scientific Finnpipette C1
C E L L M A T E II
Charging/Recharging
Charging/Recharging
Before using your
CellMate
CellMate ll
Before using your Finnpipette C1 for the first
you'll need to charge it by plugging the power
time, you'll need to charge it by plugging the
supply into the recharge socket at the base of
power supply into the recharge socket at the
the pipettor's handle. Simply plug the other
base of the pipettor's handle. Simply plug the
end into a standard 100-240 volt, 50-60 Hz
other end into a standard 100-240 volt, 50-60
wall socket and allow the unit to charge
Hz wall socket and allow the unit to charge
anywhere from 15 minutes to 2 hours. For
anywhere from 15 minutes to 2 hours. For
added ease and convenience,
added ease and convenience,
Finnpipette C1 features:
CellMate
features:
• A battery icon on the
• A battery icon on
LCD display that
the LCD display that
indicates the level
indicates the level of
of battery charge — the
battery charge—-the
more bars, the greater
more bars, the greater
the charge.
the charge.
• Special circuitry that
• A blue light that blinks when the battery
makes it impossible
charge gets low.
to overcharge the battery and that allows
the pipettor to be charged or partially
• Special circuitry that makes it impossible
charged at any convenient time.
to overcharge the battery and that allows
the pipettor to be charged or partially
Using Finnpipette C1
charged at any convenient time.
To use your Finnpipette C1, insert a pipet
Using CellMate II
securely in the holder and follow these simple
directions:
To use your
CellMate ll
CellMate
in the holder and follow these simple directions:
To Aspirate
Insert the pipet into your sample and depress
To Aspirate
the upper trigger.
Insert the pipet into your sample and depress
the upper trigger.
for the first time,
CellMate ll
, insert a pipet securely
To Dispense
Insert the pipet tip into your chosen vessel
To Dispense
and depress the lower trigger. (Partially
Insert the pipetinto your chosen vessel
depressing the trigger allows for controlled
and depress the lower trigger. (Partially
gravity dispensing.)
depressing the trigger allows for controlled
gravity dispensing.)
To Set The Pump Speed
Buttons on the rear of your
To Set The Pump Speed
allow you to set your aspiration (upper button)
Buttons on the rear of your Finnpipette C1
and dispense (lower button) speeds. Eight
unit allow you to set your aspiration
speeds are available for each function—-simply
(upper button) and dispense (lower button)
push "+" for faster and "-" for slower. Your
speeds. Eight speeds are available for
selection will be displayed on the lower portion
each function—simply push "+" for faster
and "-" for slower. Your selection will
of the pipettor's LCD. A zero speed selection on
be displayed on the lower portion of the
dispense enables gravity dispensing.
pipettor's LCD. A zero speed selection on
Disinfecting And
dispense enables gravity dispensing.
Disassembling
Disinfecting And
The entire
CellMate
CellMate ll
Disassembling
most common laboratory disinfectants but
The entire Finnpipette C1 can be cleaned
must not be submerged in liquid. To prepare
withmost common laboratory disinfectants
the unit for cleaning:
but must not be submerged in liquid. To
• Remove the nosepiece by turning the
prepare the unit for cleaning:
housing in a counterclockwise direction.
• Remove the nosepiece by turning
• Remove the silicone rubber pipet gripper
the housing in a counterclockwise
from the nosecone. Pipet gripper and
direction.
nosecone may be autoclaved.
• Remove the silicone rubber pipet
gripper from the nosecone. Pipet
gripper and nosecone may be
Air Filter
autoclaved.
Aspiration rate slowing may be a sign that the
Air Filter
air filter needs replacing. To do so, remove the
nosepiece and pipet gripper, pull filter firmly
Aspiration rate slowing may be a sign that
the air filter needs replacing. To do so,
and wiggle to remove from body.
remove the nosepiece and pipet gripper,
pull the filter firmly and wiggle to remove
from body.
6
CellMate ll
unit
CellMate
can be cleaned with
H
P
ANDHELD
IPETTING
5
Werbung
