Werbung
Wall Attachment
Fp C1
Wall Attachment
CellMate
The enclosed
CellMate ll
mount may be attached to a
smooth, clean surface using
The enclosed
CellMate
CellMate ll
the adhesive backing (also
mount may be attached to a
included). For best results,
smooth, clean surface using
wipe the wall surface with
the adhesive backing (also
alcohol, let dry, press wall
included). For best results,
mount firmly in place and
wipe the wall surface with
사용하십시오
allow to set overnight before
alcohol, let dry, press wall
using. For rough surfaces, mount with screws.
mount firmly in place and
allow to set overnight before
using. For rough surfaces, mount with screws.
1mL Pipet Support
1mL Pipet Support
To enhance pipetting
performance when using 1mL
CellMate
pipets,
CellMate ll
features a
To enhance pipetting
unique pipet support. Simply
performance when using 1mL
Fp C1
snap the accessory into the
pipets,
CellMate
CellMate ll
features a
nosecone housing, insert your
unique pipet support. Simply
pipet, and perform your
snap the accessory into the
chosen application with a
nosecone housing, insert your
stable, wobble-free pipet.
pipet, and perform your
chosen application with a
stable, wobble-free pipet.
6
26 26
6
wall
wall
Power Requirements
전원
Power supply input
전원
Power Requirements
Power supply output
Power supply input
전원
Power supply output
EXPLANATION OF SYMBOLS ON POWER SUPPLY
=
DC Symbol
=
For Indoor Use Only
EXPLANATION OF SYMBOLS ON POWER SUPPLY
=
Class 2 Power Supply
=
DC Symbol
=
For Indoor Use Only
Environmental Operating Conditions
=
Class 2 Power Supply
For optimum performance, your
Fp C1
pipettor should be used under the following
Environmental Operating Conditions
range of conditions:
For optimum performance, your
pipettor should be used under the following
Operating altitude
range of conditions:
Operating temperature
온도
Relative humidity
Operating altitude
Mains supply voltage fluctuations
Operating temperature
주
(for external power supply) 90V AC or 264V AC
외부
Relative humidity
Transient overvoltage
Mains supply voltage fluctuations
(for the power supply)
(for external power supply) 90V AC or 264V AC
Applicable rated
Transient overvoltage
pollution degree
(for the power supply)
Applicable rated
pollution degree
27
100V AC or 240V AC,
50-60 Hz, 0.2A
6.0V DC, 0.5A,
100V AC or 240V AC,
Constant Current
6.0V DC, 0.54A
50-60 Hz, 0.2A
6.0V DC, 0.5A,
Constant Current
CellMate
CellMate ll
CellMate ll
CellMate
0-1,524m
10-35
C
°
10-95% non-condensing
0-1,524m
10-35
C
°
10-95% non-condensing
Installation Category II
Pollution Degree 2
Installation Category II
(normally only non-
conductive pollution
Pollution Degree 2
occurs)
(normally only non-
conductive pollution
occurs)
Werbung
