List Of Spare Parts - Elektror HRD series Betriebsanleitung

GB IRL
5.2 V-belts
Belt drive and free rotating parts are to be covered with a belt
guard in accordance with DIN EN 294. The belt tension must
be checked after an operating time of approx. 2 hrs. Retension
the belts if required.
5.3 Micro-filters
The degree of clogging of the filter mats should be checked at
regular intervals, depending on the ambient conditions/condi-
tions of use, i.e. the user is responsible for ensuring that the
filters are permeable.

6 List of spare parts

6.1 Housing positions
It is essential to state the housing position when ordering spare
parts. The blower position can be identified from the name plate
or from the diagrams below. Order the spare parts to suit the
rotational direction.
Anti-clockwiese rotation = El to Hl
El Fl
Gl Hl
7 EC Manufacturer Declaration
Elektror
airsystems gmbh
Richard-Hirschmann-Strasse 12, D-73728 Esslingen/Neckar
Postfach 10 02 51, D-73702 Esslingen/Neckar
We certify on our sole responsibility that the product to which this certificate relates, is in conformity with the standards or
standard-setting documents listed below.
If a modification of the unit(s) is made without our consent, this certificate becomes invalid.
Description of the machine:
High-pressure blower type HRD 1 T, HRD 14 T, HRD 2 T, HRD 60, HRD 65, HRD 7
Relevant regulations to which this machine corresponds:
EC machine directives (98/37/EC)
Source references of harmonised standards:
DIN EN ISO 12100-1, Safety of machines, basic terms, general configuration directives;
Part 1: Basic terminology, methodology – Part 2: Technical principles
Starting operation of this machinery part is not allowed as long as it is not assembled into the main installation respec-
tively not all necessary safety devices have been installed which fulfill the requirements of the EC directive for machines
with regard to safety and health.
Kreher (Managing director)
Esslingen, 02.10. 2006
8
☛
Note!
Repairs must be carried out by the manufacturer
only. We cannot accept any liability for repairs
carried out by third parties.
6.2 When ordering please state
☛
Note!
G Serial no. (rating plate)
G Blower Type (rating plate)
G Part No. and/or item no. (spare parts list)
Clockwise rotation = Ar to Dr
Ar Br
Cr Dr