Sharp XE-A303 Bedienungsanleitung Seite 63

s
(3) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
3. Footer print on receipt programming (Press
(1) Go to (2) when the footer print on receipt does not
need to be changed from "NO". Otherwise, press
:
key to display "YES".
:
Each time key is pressed, the display shows
"YES" and "NO" alternately.
Default setting is "NO".
This programming decides whether or not the
machine should print a message at the foot of a
receipt when a specified key is used. With regard
to programming method of footer logo message,
refer to "Logo messages" section on page 25.
s
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
4. Entry of amount tendered programming (Press
(1) Go to (2) when the entry of amount tendered does
not need to be changed from "NON
COMPULSORY". Otherwise, press
display "COMPULSORY".
:
Each time key is pressed, the display shows
"COMPULSORY" and "NON COMPULSORY"
alternately. In case of
"INHIBIT" is displayed instead of "NON
COMPULSORY".
Default setting is "NON COMPULSORY" or "INHIBIT".
s
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
key to register the text.
key to register the setting.
:
key to
c b
and programming,
key to register the setting.
1 2 3
Part Part Part
s
s
to skip. / Press
s
s
to skip. / Press
s
FOR THE MANAGER
FOOTER PRINT
33
A
to terminate.)
AMOUNT TENDERED
NON COMPULSORY
A
to terminate.)
LIMIT DIGITS
33
NO
8
61