Sharp XE-A303 Bedienungsanleitung Seite 25

s
(3) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
3. Unit price programming
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
s
(2) Press the key to register the unit price.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting will
be displayed.
4.
Associated dept. programming (Press
(1) Enter an associated dept. code using numeric key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
s
(2) Press the
dept. code.
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
5.
Sign programming (Press
(1) Go to (2) when the sign does not need to be
changed from "(+)". Otherwise, press
display "(-)".
:
Each time key is pressed, the display shows "(-
)" and "(+)" alternately.
Choose "(+)" for positive entry and "(-)" for negative
entry.
Default setting is "(+)" for all 1800 PLU codes.
s
(2) Press the key to register setting.
On the upper line of the display, guidance message
for the next setting will be displayed.
On the lower line of the display, the current setting
will be displayed.
key to register the item name.
s
(Press to skip
s
key to register the associated
s
. / Press
to skip
:
1
QUICK START GUIDE
Part
A
. / Press to terminate.)
A
. / Press
to skip
A
to terminate.)
key to
Part
s
PRICE
0071
PRICE
500
0071
s
ENTER DEPT#
0071
to terminate.)
ENTER DEPT#
1
0071
s
SIGN
0071
s
ENTER PLU TYPE
0071
2 3
Part
0.00
500
01
1
(+)
PLU
23