Sharp XE-A303 Bedienungsanleitung Seite 60

Programming for
1. Specify the key to program.
V
(1) Press the
On the upper line of the display, immediately after
displaying "EXCHANGE PROG.", guidance message
for the next step will be displayed.
On the lower line of the display, the corresponding
function no. will be displayed.
2. Text programming (Press
:
(1) Press key to enter text programming.
On the upper line of the display, immediately after
displaying guidance message, the current text data
will be displayed.
On the lower line of the display, the character code
corresponding to the first character of the text data
will be displayed.
(2) Enter the text.
A maximum of 12 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
S
Use the and
text data.
P
Pressing the
the right and left respectively.
s
(3) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
3. Rate programming (Press
(1) Enter the rate using numeric keys, using a decimal
point when setting fractional rates.
The rate can be set from 0.000000 to 999.999999.
Default setting is 0.000000.
s
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
58
V
V
key to enter programming.
s
to skip. / Press
B
keys to delete unnecessary
@
and key moves the cursor to
key to register the text.
s
to skip. / Press
key to register the rate.
Key operation
A
to terminate.)
S S S
EX
s
A
to terminate.)
0.939938
s
Operator display
V
EXCHANGE PROG.
37 0.00
ENTER[00]KEY
37 0.00
:
ENTER TEXT
37 0.00
EXCH1
37
EX _
37
ENTER EX RATE
37 0.000000
ENTER EX RATE
37 0.939938
OPEN RATE ENTRY
37 OPEN ENABLE
069
032