WFT Electra 1200 PRHP - Mission Red Handbuch Seite 38

FISHING with the WFT Electra 1200 PRHP - Mission Red
Correction of line data after a line-cut
First, wind the entire line back on the reel.
(Fig. 19) Press the 'SET' button for at least 3 seconds. A beep sounds, the display shows '0.0' first and then 'OK'.
!
Attention
* We recommend you execute a line data correction whenever 10 metres or more of line is cut or broken off.
* After completing a line data correction the positions 'Bait-at-Hand' and 'Water-Surface-Zero' need to be set and saved again;
otherwise the motor automatically stops with a remaining line length of 5 meters and the rest of the line must be retrieved
manually with the crank.
38
(19)
Press 'SET'
at least
3 seconds