WFT Electra 1200 PRHP - Mission Red Handbuch Seite 29

PREPARATION BEFORE USE
Filling the reel with line and saving the line data
Run the line through the level-wind and attach it to the spool. Set the star drag to a drag tension of about
1.0 to 1.5kg.
(Fig. 5) Connect the power supply and the LCD will display the message shown
in Fig.5.
(Fig. 6) Press the buttons 'SET' and 'MODE' simultaneously for 3 seconds. Then
the LCD displays the message shown in Fig. 6.
Press the 'SET' button to access the line data menu. Press the 'SET' button 3
times until the display shows 000.0.
(Fig. 7) Select 'P-6' by pressing the JIGGING-button for WFT 51KG STRONG fis-
hing line. Then wind the line onto the spool by pushing the Power Slider forward.
(7)
51KG STRONG
confirm with
JIGGING button
(continued...)
Skip with Skip with
SET button SET button
Skip with Skip with
SET button SET button
(5)
(6)
Skip with
SET button
29