WFT Electra 1200 PRHP - Mission Red Handbuch Seite 31

FISHING with the WFT Electra 1200 PRHP - Mission Red
The 'Bait-at-Hand' position
When you start fishing, you want to set the to 'Bait-at-Hand' position first.
(Fig. 9) Hold the rod upright and release line from the reel until the bait is at a position where you can grab it easily.
Then press the 'SET' button for more than 3 seconds.
(9)
Press for more
than 3 seconds.
(Fig. 10) A beep signal and a display message (Fig. 10) confirm
(10)
the completed data setting and storage.
flashes
On the left side of the display the small signal for the 'Water-
Surface-Zero' position flashes, which will be configured as
described in the next section.
31