Vacuum Cleaner Description; Labels; Vacuuming Of Liquids; Vacuuming Of Liquids And Shavings (Optional) - Nilfisk cfm WSS 100 Bedienungsanleitung

Vacuum cleaner description

Labels

Figure 1
1 Identification plate:
Code of the model, technical specifications, serial
number, CE marking, year of manufacture
2 Liquid container
3 Controls (switches)
4 Inlet
5 Vacuum/blower units
6 Liquid container closing band
7 Flow deviation valve control (DV models)
8 Liquid level indicator tube
9 Liquid exhaust valve
10 Vapour filter
11 Float for stopping liquids

Vacuuming of liquids

The machine vacuums the liquids and deposits them into the
container (2).

Vacuuming of liquids and shavings (optional)

When the machine vacuums the material (shavings and
liquids) which was produced during the machining process,
the solid part is kept in the shaving container (optional),
whereas the liquid part flows into the liquid container
underneath (2).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet (4) and then fit the required tool on to the end
part (refer to the manufacturer's accessory catalogue or
Service Centre).
The float (11) stops the vacuuming operation (the vacuuming
units remain activated) when the liquid container (2) is full; it
is then necessary to turn off the vacuum cleaner and to empty
the liquid container (2).

Optional kits

Various optional kits are available for converting the vacuum
cleaner:
■ Shaving container kit
It keeps the shavings in the container.
■ "Slush" kit for fine shaving retaining
It retains fine shavings into the shaving container.
On request, the vacuum cleaner can be supplied with optional
kits already installed. However, they can also be installed at a
later date.
Please contact the manufacturer's sales network for further
details.
Instructions to install parts on request are included in the
conversion kit.
WARNING!
Use only genuine optional kits supplied and
authorized by the manufacturer.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
Model A (mm)
WSS 100 700
WST 100 700
3
WSS100 - WST100
Figure 2
B (mm) C (mm)
860 1,500
1,200 1,500
09/2014
GB
Kg
65
75