Herunterladen Inhalt Inhalt Diese Seite drucken

Liquids Vacuuming; Maintenance And Repairs; Technical Specifications; Dimensions - Nilfisk cfm WSS 100 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 33

Liquids vacuuming

WARNING!
Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
WARNING!
Before vacuuming, check that the float is present.
If foam forms, turn off the vacuum cleaner
immediately and empty the container.
Warning: switch off the vacuum cleaner
immediately if foam or liquid leaks out.
Warning: the dirty liquid collected by the vacuum
cleaner must be considered conductive.
WARNING!
Do not use the vacuum cleaner without the float!
If it's used without the float, the vacuum cleaner may
be seriously damaged.

Maintenance and repairs

WARNING!
Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts or
converting it to obtain another variant, the plug must
be removed from the socket.
Carry out only the maintenance operations
described in this manual.
Use only original spare parts.
Do not modify the vacuum cleaner in any way.
Failure to comply with these instructions could
jeopardize your safety. Moreover, such action
would immediately void the EC declaration of
conformity issued with the vacuum cleaner.
WARNING!
To carry out maintenance operations which are not
described in this manual contact the manufacturer's
Service Centre or our sales network.

Technical specifications

Parameter
Voltage / frequency
Power rating
Noise level
Protection
Insulation
Shaving capacity
(optional)
Max liquid capacity
Inlet (diameter)
Max vacuum
Maximum air flow rate
(without hose and reductions)

Dimensions

Model
WSS 100
A (mm)
B (mm)
C (mm)
kg
(1)
(1) Net weight
Storage conditions:
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
Operating conditions:
Maximum altitude: 800 m
(Up to 2,000 m with reduced performances)
Temperature: -10°C ÷ +40°C
Humidity: ≤ 85%
5
WSS100 - WST100
Units
WSS 100 / WST 100
V/Hz
230/50
110/50-60
kW
2.4
dB(A)
79
IP
44
Class
I
L
25
L
100
mm
50
mbar
220
L/min
4,500
Figure 3
WST 100
580
580
800
880
1,230
1,230
50
60
[ NOTE ]
1.6
73
44
I
25
100
50
160
3,690
GB
09/2014

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Wst 100

Inhaltsverzeichnis