Labels; Optional Kits; Vacuum Cleaner Description - Nilfisk cfm 3308 Betriebsanleitung

3308 / 3508 / 3558

Labels

1 Identification plate
Code of the model which includes the category of use
(L, M, H), technical specifications, serial number, CE
marking, year of manufacture.
2 Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is off.
Failing this, the shaking would have no effect while the
filter itself could be damaged.
3 Warning label
(For L, M, H versions)
4 Exhaust
5 Control and check panel
(For L, M, H versions).
6
Control panel
(For 3308 - 3508 - 3508 W - 3558 models)
7 HEPA filter container
(For L, M, H versions)
8 Suction union hose
(For 3308 - 3508 - 3508 W - 3558 models)
9 Filtering chamber
10 Inlet
11 Inlet plug
12
Dust container
13 Panel power plate
Indicates that the panel is powered by the voltage given
on the data plate.
1 Class L label
2 Class M label
3 Class H label
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (10, Fig. 1) and blows out through the
GB
exhaust (4, Fig. 1). After the hose and tools have been fitted,
make sure that the motor turns correctly.
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part.
Refer to the manufacturer's accessory catalogue or Service
Centre.
C67

Vacuum cleaner description

Figure 1
Figure 2
The diameters of the authorized hoses are given in the
technical specifications table.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container.
The vacuum cleaner is equipped with a main filter which
enables it to be used for the majority of applications.
Different types of main filter are available: standard and class
L and M for dusts that are hazardous for the health.
Besides the main filter which retains the more common types
of dust, the vacuum cleaner can be fitted with a HEPA filter at
the intake and/or exhaust side, with a higher filtering capacity
for fine dusts and substances that are hazardous for the
health.

Optional kits

Various optional kits are available for converting the vacuum
cleaner:
■ Level gauge for liquids suction/stop
■
Removable separator
■ Clamp and bracket
■ Downstream HEPA filter
■ Grill and depressor
■ Grid
■ Cartridge filter
■ Electric filter shaker
■ Limiting valve
On request, the vacuum cleaner can be supplied with optional
kits already installed. However, they can also be installed at a
later date.
Please contact the manufacturer's sales network for further
details.
Instructions to install parts on request are included in the
conversion kit.
WARNING!
Use only genuine optional supplied and authorized by
the manufacturer.
4
09/2014