Setting Up The Ccd Unit; Attaching A Cable Adaptor To A Camera Head - Sony OHB-T450WSP Installationsanleitung

Setting Up the CCD Unit

Attaching a Cable Adaptor to a Camera Head

1
Loosen the lever of the camera head and bring the
viewfinder mounting section forward.
2
Loosen the four screws on the right side and
remove the right side panel from the camera head.
3
Loosen this lever
4
Screw positions
Screw positions
Connect the normal cable to the cable adaptor.
Attach the cable adaptor to the camera head and
secure it with the four mounting screws of the
adaptor.
IF-708 board CN5
(Continued)
5(E)