Sony OHB-T450WSP Installationsanleitung Seite 17

English
For the customers in the USA (OHB-T450WS only)
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.
Table of Contents
Overview ............................................................... 2(E)
Example of Usage ............................................. 2(E)
Functions of Parts and Controls......................... 3(E)
Optical Head ...................................................... 3(E)
Cable Adaptor .................................................... 4(E)
Setting Up the CCD Unit .................................... 5(E)
Attaching a Cable Adaptor to a Camera Head .. 5(E)
Attaching the Optical Head to a Tripod
Adaptor ......................................................... 6(E)
Mounting a Lens to an Optical Head ................. 7(E)
Mounting the Optical Head on a Tripod ............ 8(E)
Connections ....................................................... 9(E)
Attaching a 4 : 3/16 : 9 Selector Board to the
Camera Head .............................................. 10(E)
Selecting the Gain of 36 dB ............................ 10(E)
Specifications ....................................................... 11(E)
1(E)