Automatic Updates; Further Functions And Notes - Canton Smart Soundbar 9 Kurzanleitung

English

AUTOMATIC UPDATES

After you connect the Soundbar 9 to the network, future firmware updates will
automatically be performed on your Soundbar 9. After the initial setup and each
time it is turned on, Soundbar 9 looks for an update and installs it - if available. The
LED flashes green / red during the update and the display shows „UPDATING".
During this time, the system is not operational.
Attention:
• Do not disconnect the Soundbar 9 from the power supply during an update
process.

FURTHER FUNCTIONS AND NOTES

The Soundbar 9 contains a multitude of other great functions. All settings can be
found in the detailed instruction manual. These can be found under:
www.canton.de/manual/soundbar9
38