Connection To Tv Device - Canton Smart Soundbar 9 Kurzanleitung

CONNECTION TO TV DEVICE

HDMI (recommended)
Connect the HDMI cable from the HDMI OUT (ARC) output on the back of the
1
Soundbar 9 to the HDMI IN (ARC) input on your TV.
Now select the input [TV] on the Smart-remote using the up or down
2
arrow keys ( , ).
Notes:
• An HDMI connection supports digital audio and video with a single connector.
It is the best option to connect to your Soundbar 9.
• If your TV features an HDMI ARC connector, you can enjoy the TV audio
through your Soundbar 9 by using a single HDMI cable.
• This HDMI connection is required if you intend to connect other video devices
to the Soundbar 9 inputs to display on your TV.
• Activate HDMI CEC mode on your TV. HDMI CEC (Consumer Electronics
Control) is a feature that allows compatible devices to be controlled from a
single remote control. For details, refer to the instruction manual of your TV.
Optical digital input
Connect the OPTICAL IN connector on the Soundbar 9 to the OPTICAL OUT
1
connector of your TV with an optical cable.
On the Smart-remote, use the up and down arrows ( , ) to select the
2
input [CD].
Note:
• Make sure you have removed the protective cap from both ends of the
optical cable.
English
3 3 1