LichtLogistik LED Support SlimPixx-System Bedienungsanleitung Seite 19

Your SlimPixx-stick
Your SlimPixx-stick is an extremely small and compact LED Pixel effect.
Provided in 1m and 0,5m version with blackface cover, you can even fit your SlimPixx
with more different shapes of covers: Clear, roundcover, squarded cover.
You can easily change the cover by opening the two screws of the end caps, remove
end cap and cover. Slide in the new cover and reassemble end caps and screws.
Every SlimPixx-stick is equipped with an input (male) and an output (female)
connector.
You can assemble up to 15 pcs in a row. The usage of any common extension cords
between the SlimPixx-sticks is not possible. For this, please use a SlimPixx Range
Extender with extension cords or a SlimPixx Signal booster.
Further more, every SlimPixx is equipped with 2 sliding blocks with M3 and M6
threads. These can be used for easy mounting of the SlimPixx-sticks.
At least every SlimPixx-stick is equipped with a fast connector system at both ends.
For this usage press down the silver knot and bring in the special connectors
provided for this system. Please take care that the slider will lock up perfectly.
Fitted with DC/DC changers inside, the SlimPixx-stick will heat up during usage.
For longevity, please do not use the SlimPixx on full white for long time.
The heat will decrease the lifetime of LED.
Manual | SlimPixx-stick
Bedienungsanleitung | SlimPixx-Stick