Getting Started: Intercon-Nettool; Starting The Intercon-Nettool - SEH ThinPrint Reader TPR-11 Schnellinstallationsanleitung

Getting Started: InterCon-NetTool

Starting the InterCon-NetTool

Start the InterCon-NetTool on your client via the Windows start menu.
(Start All Programs
After the InterCon-NetTool was started, it searches the network for existing
devices and displays them in the 'device list'.
During the initial configuration, client and TPR-11 must be assigned to the same
local network segment.
Detailed information on how to use the InterCon-NetTool can
be found in the Online Help. To start the Online Help, select
Help – Online Help from the menu bar.
Quick Installation Guide
SEH Computertechnik GmbH InterCon-NetTool)
[en] 11