HP LaserJet Pro M226 Schnellstartanleitung Seite 4

11. Set up fax (optional)
11.1
Connect the printer
The printer is an analog device. HP recommends using the printer on a
dedicated analog telephone line.
NOTE: Some countries/regions might require an adapter for the
phone cord that came with the printer.
Connect the phone cord that came with the printer to the Fax
the printer and to the telephone jack on the wall.
How do I connect an answering machine or
extension phone?
1. Remove the plug from the phone port
2. Disconnect the answering machine phone cord from the phone
jack, and then connect it to the phone port
3. Connect the phone cord that came with the printer to the fax port
on the printer and to the telephone jack on the wall.
1
How do I set up HP printers in digital phone
environments?
HP printers are designed specifically for use with traditional analog phone
services. For a digital phone environment (such as DSL/ADSL, PBX, ISDN,
or FoIP), digital-to-analog filters or converters might be necessary when
setting up the printer for fax.
Note: Depending on the phone company, the printer might not be
compatible with all digital service lines or providers, in all digital
environments, or with all digital-to-analog converters. Contact the phone
company to determine which setup options are best.
Note: When setting up ring pattern detection in a PBX phone system
that has different ring patterns for internal and external calls, make sure
to dial the printer fax number using an external number for recording
the ring pattern.
.
on the printer.
3
3
2
11.2
Configure the printer
Configuring the fax time, date, and header settings is required to use the
fax feature.
1. From the Home screen on the printer control panel, touch the
Setup
2. Select Fax Setup, and then select Basic Setup.
port on
3. Select Time/Date.
4. Select the 12-hour clock or 24-hour clock.
5. Use the keypad to enter the current time, and then touch the
OK button.
6. Select the date format.
7. Use the keypad to enter the current date, and then touch the
OK button.
8. Select Fax Header.
9. Use the keypad to enter the fax number, and then touch the
OK button.
NOTE: The maximum number of characters for the fax number
is 20.
10. Use the keypad to enter your company name or header, and then
touch the OK button.
To enter special characters that are not on the standard keypad,
touch the @#$ button to open a keypad that contains special
characters.
NOTE: The maximum number of characters for the fax header is 40.
Learn more!
For more information about other ways to send faxes, such as
scheduling a fax to be sent later or sending faxes from a computer,
see the User Guide
www.hp.com/support/colorljMFPM226.
For information about configuring the printer as a stand-alone fax
machine, or for use with an answering machine or extension phone,
see the User Guide on the printer CD.
4
button.
www.hp.com/support/colorljMFPM225 or