Front Panel Led Indicators; Cleaning - Ecler DN44BOB Bedienungsanleitung

3.8. Front panel LED indicators

The DN44BOB front panel provides the following elements :
•
POWER LED indicator (5): lights up when the unit is on.
•
DANTE LED indicator (3):
o Red LED: Ethernet network disconnected.
o Green LED: Ethernet network connected and device operating as master (transmitting
Dante® clock on the network).
o Amber LED: Ethernet network connected and device operating as slave (synchronized
with the clock of the Dante® Master unit on the network).
•
DATA LED indicator (3): off when there is no connection with EclerNet Manager even if
connected to Ethernet. Lit when connected to EclerNet Manager. Blinking to indicate data traffic
with EclerNet Manager or other.
•
Audio input (analogue) LED indicators (1): indicate the presence of an audio signal at the unit
inputs and its intensity level (green, amber and red colours which correspond, in this order, to an
increasing level of intensity).
•
Audio output (analogue) LED indicators (2): indicate the presence of an audio signal at the unit
outputs and its intensity level (green, amber and red colours which correspond, in this order, to
an increasing level of intensity).

4. CLEANING

The casing should not be cleaned with solvents or abrasive materials since they can damage the
screen printing. To clean the product, please used a cloth dampened with a mild liquid detergent and
water, and wipe it off with a dry and clean cloth. Be careful that water never gets into the unit through its
holes.
7