Warranty; Monitoring Of Test Resources; Basic Safety Precautions; Pay Attention To The Instructions In The Operation Manual - KERN KFS-TM Betriebs Und Installationsanleitung

3.3 Warranty

Warranty claims shall be voided in case
• Our conditions in the operation manual are ignored
• The appliance is used outside the described uses
• The appliance is modified or opened
• Mechanical damage or damage by media, liquids, natural wear and tear
• The appliance is improperly set up or incorrectly electrically connected
• The measuring system is overloaded

3.4 Monitoring of Test Resources

In the framework of quality assurance the measuring-related properties of the display
unit and, if applicable, the testing weight, must be checked regularly. The responsible
user must define a suitable interval as well as type and scope of this test. Information
is available on KERN's home page (www.kern-sohn.com with regard to the
monitoring of display units' test substances and the test weights required for this. In
KERN's accredited DKD calibration laboratory test weights and display units may be
calibrated (return to the national standard) fast and at moderate cost.

4 Basic Safety Precautions

4.1 Pay attention to the instructions in the Operation Manual

Carefully read this operation manual before setup and commissioning, even if you
are already familiar with KERN balances.

4.2 Personnel training

The appliance may only be operated and maintained by trained personnel.
10 KFS-TM-BA_IA-e-1916