Before Starting The Equipment; Disposal And Recycling; Operation; Cleaning, Maintenance And Ordering Of Spare Parts - EINHELL 34.070.00 Originalbetriebsanleitung

5. Before starting the equipment

Screw the vacuum pump (Fig. 1/ Item 1) into the
sealing plug (Fig. 1/ Item 2) and place this rmly
in the plastic container (Fig. 1/ Item 3).
Insert the supplied suction hose (Fig. 1/ Item 4)
into the sealing plug (Fig. 2).

6. Operation

Suction process (Fig. 3)
Place the end of the suction hose into the contai-
ner that you wish to empty. By making pumping
movements with the pump lever a vacuum is
created in the collecting container and the liquid
is sucked into this container.
The suction hose can be closed with the supplied
shut-o clip (Fig. 1/Item 5) to empty the collecting
container.
Important.
•
If the container you wish to empty is higher
than the suction pump, the liquid will continue
to flow even after you stop the pumping mo-
vements. In this case the liquid can be stop-
ped using the supplied shut-off clip (Fig. 1/
Item 5).
•
Do not leave the equipment unattended du-
ring the suction process.
•
The suction process must be fully completed
when you leave the unit.
•
Petrol and oil are dangerous substances
which must be disposed of in accordance
with public regulations.
7. Cleaning, maintenance and
ordering of spare parts
7.1 Cleaning
•
Rub down the equipment with a clean cloth.
•
We recommend that you clean the equipment
immediately after you use it.
7.2 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o ces.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes.
- 8 -