Instructions For Care; Spare Parts - Andermatt Biocontrol topcat Gebrauchsanleitung

30

Instructions for care

Clean the trap occasionally with water and leave
to dry. Lubricate with odourless milking grease
if needed.

Spare parts

All parts can be replaced individually. Please
contact your nearest reseller.
Bringing misaligned triggers into the
right position
Bring the rocker into locking position (see
page 25 ). Bring the two triggers, one after the
other, in position and hold them there with one
hand. Grasp the small hook of the snapper arm
and turn clockwise until the hook and triggers are
positioned parallel to the rocker.
Functional check: set the trap and check if both
triggers (Fig. left) are positioned parallel to the
rocker (Fig. right).