Operation - auna Nostalgy Anschluss- Und Anwendungshinweise

CD Operation
1. Press the "ON/OFF" button to "ON" switch the device on
2. Set the function switch to CD model (PH/CD/USB/SD)
3. Press the "OPEN"on the CD cover to open the CD tray.
4. Place a disc on the tray with the printed label facing up.
5. Close the CD Cover, when the CD begins playing the LED display will show the total number of
tracks.
6. Then until will START playback, AUTOMATICALLY.
7. Turn the VOLUME knob to adjust the volue.
Notes:
• Never place more than one disc in the tray.
• The CD must be placed in the middle of the CD drive.
• If the CD is not inserted correctly, it could cause the tray to open with difficulty or it could even prove
impossible to re-open it as soon as it is closed. To avoid this problem, you need to be sure that you
have inserted the CD correctly.
• The drive opens automatically after you press on OPEN in the centre of the turntable platter.
• Do not open or force it to open by hand – this may cause irreparable damage to the mechanism and
this would not be covered by the warranty.
CD functions
PAUSE/PLAY BUTTON
• Temporarily starts / stops CD playback.
STOP button
• Stops CD playback
DN/FR or UP/FF BUTTON (PREVIOUS or SKIP Track)
• Press the DN/FR button repeatedly to select a previous track.
• To restart the track press the DN/FR button once.
• To skip a track press the UP/FF button
+10 BUTTON
• Press to skip 10 tracks at a time
REPEAT BUTTON
• Press once to repeat one single track.
• Press twice to repeat all tracks.
14

Operation

www.auna.de