ENG
• The accompanying lamp shade does not tolerate water. In bad weather,
position the heater in a sheltered location away from rain.
MAINTENANCE AND CLEANING
• Remove the power plug from the socket and allow the heater to cool down before cleaning.
• Wipe the surface using a soft, slightly damp cloth. Never use strong cleaning agents.
• Do not immerse the heater in water when cleaning.
• Over time the reflector becomes dusty and must be taken to an authorised service
workshop for cleaning.
STORAGE
If the heater will not be used for a long period of time, it should be stored in a cool, dry and
dust-free place. We recommend that you store the heater in its original packaging.
TECHNICAL DATA
Voltage
Output modes
Enclosure class
Number of heating element
Heating element type
Length power cable
Dimensions
Weight
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately
from household waste. They should be taken
for recycling in accordance with local rules for
waste management.
4
230V, 50/60 Hz
1000W/2000W
IP34
2
Halogen
2 m
650 x 650 x 2160 mm (LxWxH)
12.3 Kg