Product Description And Specifica- Tions - Bosch PKP 18 E Originalbetriebsanleitung

OBJ_BUCH-868-004.book Page 7 Thursday, November 12, 2015 11:50 AM
danger of operating errors and inju-
ries.
 Supervise children. This will ensure
that children do not play with the glue
gun.
 Children must not be allowed to
clean and perform maintenance on
the glue gun without supervision.
 Do not allow persons unfamiliar with the glue gun or
these instructions to operate the device.
 Before each use of the unit, check the glue gun, cable
and plug. If damage is detected, do not use the glue
gun. Never open the glue gun yourself, and have re-
pairs carried out only by a qualified repair person using
only identical replacement parts. Damaged glue guns,
cables and plugs increase the risk of an electric shock.
 Do not leave the switched on glue gun unattended.
 Keep the glue gun away from rain or moisture. The pen-
etration of water into the glue gun increases the risk of an
electric shock.
 When operating the glue gun in damp environments is
unavoidable, use a residual current device (RCD). The
use of a residual current device (RCD) reduces the risk of
an electric shock.
 Do not touch the hot nozzle. Danger of burns.
 The mains plug of the glue gun must match the socket
outlet. Never modify the plug in any way. Unmodified
plugs and matching outlets will reduce the risk of electric
shock.
 Do not misuse the cord to carry the glue gun, hang it up,
or for pulling the plug out of the outlet. Keep the cord
away from heat, oil, sharp edges or moving parts. Dam-
aged or entangled cords increase the risk of electric shock.
 Have your glue gun repaired only through a qualified
repair person and only using original replacement
parts. This will ensure that the safety of the product is
maintained.
 After use, place down the glue gun in a safe manner and
allow it to cool down completely before packing it
away. The hot nozzle can cause damage and/or burns.
 Do not use the cable for pulling the plug out of the sock-
et outlet. Keep the cable away from heat or oil. Damaged
or entangled cables increase the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Bosch Power Tools
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Intended Use
The glue gun is intended for the quick gluing of clean, dry and
grease-free materials with hot-melt adhesives.
Use the glue gun only when you fully understand and can per-
form all functions without limitation, or have received appro-
priate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the glue gun on the graphics page.
1 Nozzle
2 Heat protection cover
3 Glue stick
4 Feed trigger
5 Support stand
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Glue Gun
Article number
Rated power input
– for heating up
– for maintaining heat
Heating time
Gluing temperature
Gluing capacity
Glue stick diameter
Glue stick length
Weight according to EPTA-
Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Assembly
– Screw a nozzle 1 onto the glue gun. Insert the support
stand 5 into the openings on both sides of the glue gun.
English | 7
PKP 18 E
0 603 264 5..
W 200
W 16
min 7
°C 200
g/min 20
mm 11
mm 45–200
kg 0.35
/II
1 609 92A 1LK | (12.11.15)