Package Contents - Axis Communications P3363-VE Installationsanleitung

AXIS P33-VE Network Cameras Installation Guide
AXIS P3363-VE/P3364-VE/P3364-LVE
Network Camera Installation Guide
Follow these instructions to install the network camera
1. "Package contents" on page 5
2. "Hardware overview" on page 6
3. "Install the hardware" on page 7
4. "Access the video stream" on page 10
5. "Adjust the Lens" on page 10
6. "Complete the installation" on page 11
Notes:
• Before you begin, make sure that the package contents, power supply, and the required cables, tools, and
documentation are available. See Package contents below.
• This network camera is intended to operate with PoE; if not available use Axis PoE Midspan 1 port (not
included)

Package contents

Item
Network camera
with heating module
Mounting bracket
Dome covers
Weather shield
Labels
Mounting kit
CD
Printed Materials
Optional accessories
Models/variants/notes
AXIS P3363-VE
AXIS P3364-VE
AXIS P3364-LVE
Clear transparent cover (not for AXIS P3364-LVE)
Smoked transparent cover
Not applicable for AXIS P3364-LVE
2 adhesive serial no. labels
Resitorx screw driver, 2 long screws, drill template, 5-meter network cable
with gasket, 1 gasket, terminal block connector
Installation and Management Software CD
Installation Guide (this document)
AVHS Authentication key
Threaded adaptor with cable shield
See www.axis.com for information on available accessories
Page 5