TRILUX LMS HFS RMC Bedienungsanleitung Seite 27

permanent mode
In -permanent mode- the luminaire can be
brought to a preset minimum DIM value for
resting after expiry of the hold time. The DIM
value in this case depends on the correspon-
ding DIM value setting.
Information permanent mode
If level 1 is preset to 0% for the DIM value,
then after activation of permanent mode
the system functions automatically with
the 10% DIM value.
52
time limited mode
In -time limited mode- the luminaire dims
down to the set DIM value after expiry of the
corresponding hold time.
After further expiry of the hold time without
movement, the luminaire switches off.
53