TRILUX LMS HFS RMC Bedienungsanleitung Seite 18

The infrared remote control
is ready for operation when the batteries are
.
inserted
This can also be seen when the LED control
lamp flashes once with each button press.
factory setting
The of the system is as
follows:
Signal strength (SENS)
Sensor sensitivity/range are set to 80%
sensitivity.
Hold time (TIME)
After the previously detected movement by
the sensor, illumination duration in the lumi-
naire is set to a hold time of five minutes.
Light value (LUX)
The light sensitivity of the daylight sensor is
factory-set to maximum (daylight).
Dimming level (DIM)
The DIM value is set to 0% (off).
34
LMS HFS RMC
1
4 2
5
3
LED
P
T
D
SENS
DIM
TIME LUX
35