Basic Function - TRILUX LMS HFS RMC Bedienungsanleitung

Basic function:

Hold time (
Required remote control buttons:
Funktion button
+
(press configuration buttons
1-5 within 10 seconds)
Configuration button
Configuration button
Configuration button
Configuration button
Configuration button
10 seconds after LED feedback (for the set
level) a rapid flashing sequence on the LED
is displayed (approx. 2 to 3 seconds) to show
operational readiness of the luminaire.
42
TIME)
TIME
1
2
3
4
5
press =
red control LED in the luminaire flashes
(feedback of last setting)
press = 1 min.
red control LED in the luminaire acknowledges 1x
press = 5 min.
red control LED in the luminaire acknowledges 2x
press = 10 min.
red control LED in the luminaire acknowledges 3x
press = 15 min.
red control LED in the luminaire acknowledges 4x
press = 30 min.
red control LED in the luminaire acknowledges 5x
43