Ayce 2711 Originalbetriebsanleitung Seite 78

surface.
• Select the lowest speed for making initial plunge, start off at lowest speed for
increased control. After making your initial cut, you can increase speed for faster
cutting ability.
• Flush cutting blades are intended to make precise cuts to allow for installation of
flooring or wall material. When flush cutting, it is important not to force the tool
during the plunge cut. If you experience a strong vibration in your hand during the
plunge cut, this indicates that you are applying too much pressure. Back the tool
out and let the speed of the tool do the work. While keeping the teeth of the blade in
the work surface, move the back of the tool in a slow sideways motion. This motion
will help expedite the cut.
• The flat saw blade is ideal for making precise cuts in wood, plaster, drywall
material.
• Applications include cutting openings in flooring for venting, repairing damaged
flooring, cutting openings for electrical boxes. The blade works best on softer
woods such as pine. For harder woods, the blade life will be limited.
• The flat saw blade can also be used for window restoration making glazing easy
to remove. The saw blade can be placed directly against the edge of the window
frame, guiding the blade through the glazing.