Traxon Butler S2 Installationhandbuch Seite 23

Enable driver
Private logbook
Alias name
Comment
Generic
IP address
DMX Output
Output Universe DMX1
Output Univers DMX2
RDM
Enable for DMX1
Enable for DMX2
Export
First cuelist number
Cuelist count
Export Group UID
Action Pad
The Butler S2 is now configured and can be used as DMX output engine or as
standalone engine after uploading shows.
For details about RDM and the RDM browser in the Lighting Application Suite
please see the System Manual for the LAS, available for free download from www.
traxontechnologies.com.
Set the checkmark to make the device online, remove
to set it to offline mode = standalone mode.
Checkmark to use a separate logbook in the Pro-
grammer. If unset, the Butler S2 messages appear in
the main log.
An arbitrary alias name to identify the Butler S2 in the
Programmer.
A comment, e. g. the location or the function.
The selected IP address.
The DMX universe ID in the Programmer, for which
port DMX1 of the Butler S2 is used.
The DMX universe ID in the Programmer, for which
port DMX2 of the Butler S2 is used
Enable RDM for DMX1 of the Butler S2.
Enable RDM for DMX2 of the Butler S2.
The first cuelist index which is sent to the Butler S2
when exporting shows.
The number of cuelists, that get exported.
The UID for the master/slave group on export.
Not used at the moment.
Setup Manual - Butler S2
23