Basic Butler S2 Settings - Traxon Butler S2 Installationhandbuch

Setup Manual - Butler S2
LAS server
Ethernet switch
12 ... 24 V DC
RJ45
LAN
RJ45
Power supply
Butler S2
Start the Programmer from the Lighting Application Suite. In the Application
Options in the main icon menu use the Advanced settings tab. Adjust the net-
work card and IP address for the adapter that will be used to connect the server to
the network switch and the Butler S2.

Basic Butler S2 settings

Select the Network tab from the upper left window to see network configuration
and settings. Here you should see all devices in the network segment including the
Butler S2. If you need more details see the System Manual for the Lighting Applica-
tion Suite, also available for download from the Traxon Technologies website.
To set the basic configuration the Butler must not be used in the Programmer. Click
on the Butler S2 line. This opens the dialogue for all basic settings including the
network parameters.
17