Installing The Usim And Battery - LG Jil Sander E906 Benutzerhandbuch

Installing the USIM and battery

1 Remove the battery cover
Hold the phone firmly in one hand and pull the top away with
your forefinger. Then lift off the battery cover.
2 Remove the battery
Using the cut-out at the bottom, lift the battery out of its
compartment.
WARNING: Do not remove the battery when the phone is
switched on, as this may damage the phone.
3 Install the USIM card
Put the USIM card into the USIM card holder. Make sure the gold-
coloured contact area on the card is facing into the phone. Push
the USIM card holder back.
13