Configuring Handhelds; Installing The Aaa Batteries - Texas Instruments TI-Nspire Erste Schritte

Configuring Handhelds

This chapter provides information needed to:
• Maintain batteries used in the handheld.
• Change the default settings.

Installing the AAA Batteries

To install the batteries shipped with your handheld, complete the
following steps.
1. Remove the keypad from the front of the handheld.
• To unlock the keypad, turn the handheld over and slide the switch
on the back of the handheld to the right.
• Lift the keypad out.
2. Insert the four alkaline AAA batteries provided with the handheld
into the battery compartment. Arrange the batteries according to the
polarity (+ and -) diagram.
Slide switch
to the right
as shown
here.
Configuring Handhelds 61