Texas Instruments TI-Nspire Erste Schritte Seite 109

Shown on:
Sending handheld
Sending handheld
Sending handheld
Both handhelds
Message and Description
"Upgrade not accepted by
receiver."
OK
This message indicates that the receiving handheld
refuses the upgrade.
"OS has been transferred.
You can now unplug."
OK
This message indicates that the transfer is
complete and it is safe to unplug the cable from
the sending handheld.
"Sending OS. Do not
unplug cable."
This message, along with a progress bar, is
displayed while the OS Upgrade is being
transferred.
"Transfer failed. Check cable
and try again."
OK
The sending and/or receiving handheld is not
properly connected. Reinsert the cable into each
handheld, and then try the transmission again.
Updating the Handheld Operating System 103