Texas Instruments TI-Nspire Erste Schritte Seite 118

2. Turn the handheld top side up,
and slide the keypad away from
the display screen.
3. Lift the keypad off the handheld.
4. Insert the other keypad.
Ensure that it fits comfortably
into the guides on the bottom
and sides of the handheld.
Note: The keypad does not slide in
from the bottom edge of the
handheld. Instead, fit it into the
guides just above the batteries.
5. When the keypad is properly
seated on the handheld, push
the keypad toward the display
screen.
The keypad clicks into place
when properly seated and
completely inserted into the
handheld.
112 Working in TI-84 Mode