LEITZ ICON Kurzanleitung Seite 9

ICON-xxyyzz, where xxyyzz is a combination
of letters and numbers that uniquely identify
your printer from other Icon printers in the
area.
3. Click Join or Connect.
4. Once connected, start a web browser on your
computer.
5. In the address bar, type 192.168.1.1 and then
press Enter.
6. Enter your user name and password in the
User name and Password boxes.
The default user name and password are as
follows.
User name: Admin
Password: password
Changing the user name and password is
recommended. See the Leitz Icon Printer
User Guide for information on changing the
user name and password.
7. Click OK.
The Printer Setup Wizard starts.
8. Click Soft AP.
The printer is connected to your
computer in access point mode and the Leitz
Icon Control Panel is displayed.
Connecting the Printer Using Your Wireless
Network
Connecting the printer to your computer using
your wireless network is a two-step process.
1. Connect the printer to your wireless network.
2. Add the printer to your computer.
Connecting the Printer to Your Wireless
Network
You can connect the printer to your wireless
network using WPS (Wi-Fi Protected Setup) or
the Leitz Icon Control Panel.
Connecting the Printer Using WPS (Fig. 7)
You can quickly connect the printer to your
wireless network using WPS.
To connect your printer to your wireless network
using WPS, you must use a router with WPS
support.
1. Press the WPS button located on the back
of the printer. The Wireless status light begins
to blink.
2. Within two minutes, press the WPS button on
your router. Refer to the router
documentation for instructions on locating
the WPS button.
When the printer is connected to your wireless
network, the Wireless status light stops blinking
and turns solid green.
Connecting the Printer Using the Leitz Icon
Control Panel
The Leitz Icon printer includes a built-in web
server. The web server appears in your web
browser as the Leitz Icon Control Panel. If your
router does not support WPS or if you have
trouble connecting your printer to your wireless
network using WPS, you can use the Leitz Icon
EN
9