Setting Up The Printer - LEITZ ICON Kurzanleitung

Setting Up the Printer

The Leitz Icon printer is quick and easy to set up
and start using. Just connect the power, connect
the printer to your computer or wireless network,
and load the labels.
Connecting the Power (Fig. 5)
The printer is powered using the included AC
power adapter and power cord.
1. Plug the power cord into the power
adapter.
2. Plug the power adapter into the power
connector on the back of the printer.
3. Plug the power cord into an available power
outlet.
An optional, external, rechargeable battery
is available for using the printer as a portable
device. Refer to the Leitz Icon Printer User Guide
(available at www.leitz.com) for information on
using the optional battery.
Connecting the Printer to Your
Computer
Several options are available for connecting the
Leitz Icon printer to your computer.
• Connect the Printer Using USB
• Connect the Printer Using Access Point
(Soft AP) Mode
• Connect the Printer Using Your Wireless
Network
8
Software installation must be complete before
connecting the printer to your computer.
Connecting the Printer Using USB (Fig. 6)
You can connect the printer directly to your
computer using the included USB cable.
Software installation must be complete before
connecting the printer to your computer.
1. Plug the USB cable into the USB connector
located on the back of the printer.
2. Plug the other end of the USB cable into an
available USB port on your computer.
After a brief period, the printer is available in
the printer list.
Connecting the Printer Using Access Point
(Soft AP) Mode
The printer can act as its own Access Point, or
Soft AP, allowing a direct wireless connection
between the printer and your computer. Using
access point mode, you can wirelessly connect
the printer to your computer without connecting
to an existing wireless network.
To connect the printer using access point
mode
1. On your computer, search for available
wireless networks. For information on
searching for wireless networks, see the
documentation for your computer.
2. From the list of available networks, select
EN