LEITZ ICON Kurzanleitung Seite 11

Add Printer or Scanner. The Add dialog box
appears.
4. Click Leitz Icon in the list of available printers.
(Optional) Type a name and location for the
printer in the Printer name and Location
boxes.
5. Click Add.
The printer is added to the printer list and is
now available for printing.
Loading Labels (Fig. 8)
1. Push the button on the top of the printer to
open the cartridge door.
2. Lift the label guide latch as shown.
3. Pull open the folding label guide on the label
cartridge.
Avoid handling the cartridge identification
chip as this may damage the chip. If the chip
becomes damaged, the label cartridge may not
work properly.
4. Place the cartridge into the printer as shown.
Make sure the cartridge is centered and
seated securely in the printer.
5. Lower the label guide latch.
6. Close the cartridge door. The printer
automatically feeds the labels to the starting
position.
Printing Labels
Using the Leitz Icon printer, you can print a wide
variety of adhesive labels as well as non-adhesive
name badges, notes, and appointment cards.
This section describes how to print a basic
Standard Address label. For detailed information
about printing other types of labels, refer to the
Leitz Icon Software Help.
1. Click to start Leitz Icon Software.
2. Click Address on the label selection pane.
The label selection pane expands to display
the available types of Address labels.
3. Click Standard Address Label.
The label selection pane expands to display
the available Standard Address label
templates.
4. Click Standard Address Label.
The label selection pane collapses and an
Address label is displayed.
5. Click once on the displayed label to edit the
text.
6. Type an address or other text on the label.
7. If desired, use the formatting pane to change
the text formatting.
8. Click Print to print the label.
EN
11