LEITZ ICON Kurzanleitung Seite 10

Control Panel to connect the printer to your
wireless network.
1. On your computer, search for available
wireless networks.
For information on searching for wireless
networks, see the documentation for your
computer.
2. From the list of available networks, select
ICON-xxyyzz, where xxyyzz is a combination
of letters and numbers that uniquely identify
your printer from other Icon printers in the
area.
3. Click Join or Connect.
4. Once connected, start a web browser on your
computer.
5. In the address bar, type 192.168.1.1 and then
press Enter.
6. Enter your user name and password in the
User name and Password boxes. The default
user name and password are as follows.
User name: Admin
Password: password
Changing the user name and password is
recommended. See the Leitz Icon Printer
User Guide for information on changing the
user name and password.
7. Click OK.
The Printer Setup Wizard starts.
8. Follow the instructions in the Printer Setup
Wizard to connect the printer to your wireless
network.
10
Adding the Printer to Your Computer
If you connect the printer to your computer
over your wireless network, you must also add
the printer to your computer. If you connect the
printer to your computer using the included USB
cable, the printer is added to your computer
automatically.
Adding the Printer (Windows)
This section describes how to add the printer
in Windows 8 and Windows 7. If you are using
a different version of Windows, refer to the
Windows documentation for information on
adding a network printer.
1. Click Start, click Control Panel, click
Hardware and Sound, and then click Devices
and Printers.
2. Click Add a printer. The Add Printer dialog box
appears.
3. (Windows 7 Only) Select Add a network,
wireless, or Bluetooth printer.
4. In the list of available printers, click Leitz Icon,
and then click Next.
5. Follow the on-screen instructions to finish
adding the printer.
6. Click Finish.
The Leitz Icon printer is now available for
printing.
Adding the Printer (Mac)
1. Start System Preferences.
2. Under Hardware, click Print & Scan.
3. Under the printer list, click +, and then click
EN