Safety Information - LEITZ ICON Kurzanleitung

Copyright
© 2014 Esselte IPR AB. All rights reserved.
Leitz, Leitz Icon, Smart Labeling System, Intelligent Label
Cartridge are trademarks of Esselte IPR AB or its affiliates.
Mac and iPad are trademarks of Apple Inc., registered in the
U.S. and other countries.
iOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license to Apple.
Windows and Windows XP are registered trademarks of
Microsoft Corporation in the United States and other countries.

Safety Information

Intended Use
This device has been developed for printing la-
bels and similar items using Leitz Icon Intelligent
Label Cartridges. The printer should be used only
for this purpose, as described in this quick start
guide.
Precautions for Setup
• The printer is for indoor use only. Do not use
outdoors.
• The printer power adapter is designed for
100 - 240 V, 50/60 Hz. Verify the outlet voltage
is within this range before plugging in your
power adapter.
• Place the device close to an accessible power
outlet. Make sure the power cord can be easily
disconnected from the power outlet at all
times.
• Protect the power cord and the power adapter
from being strained, pinched, or buckled.
• Place the cord out of walkways to prevent
people from tripping over the cord.
• Use only the power adapter provided with the
printer. Use of an incorrect power adapter may
cause overheating or fire.
• Do not bend or place a heavy object on the
power cord as it could damage the cord and
result in risk of electric shock or fire.
• Do not use the power cord if damaged or
frayed.
• Be sure to hold only the connector end of the
power cord when disconnecting. Repeated
pulling on the cord could damage the cord.
Precautions for Operation
• Protect the printer from moisture and do not
operate if power cord or plug are defective.
• Never touch a power plug with wet hands.
• Do not place anything on top of the printer and
do not insert anything into the label exit slot.
• Never insert objects of any kind into the
printer as they may harm the mechanisms or
electrical components within the printer.
• Never spill liquid of any kind on the printer.
• Do not use the printer near water or in extreme
humidity.
• Do not drop or hit the printer.
Precautions for Cleaning, Transport, and
Storage
• Use a soft, damp cloth and to clean the
exterior of the printer. Do not use cleaning
tissues or chemical substances which might
EN
5