Safety Decals - IBEA IBT 500 Serie Gebrauchs- Und Wartungshandbuch

l Observe the safety rules, in particular the stability of the machine and safe operation.
l When tipping the load from a dumper the centre of gravity will change continuously and the ground
conditions will be essential for the stability of the machine. There are special hazards for dumpers
working on soft ground and when the load is sticking to body e.g. wet clay or freezing material.
l The machine user has to determine whether special hazards exist in his application such as toxic
gases, ground (underfoot) conditions etc., that require special precautions. He shall take measures to
eliminate or reduce the hazard.
l It is recommended to use this machine only for the purposes underlined in this manual.
l When using the machine for a long period of time, it is advisable to use suitable protection devices
such as earmuffs, gloves, etc.
1
Code number P5140662
1) Attention - Danger! Read the operator's manual carefully.
2) Never go near crawlers with hands or feet and keep people and animals away from the machine.
3) Never remove safety covers or screens and never put hands between rotating components when the
engine is running.
4) Keep away from hot parts on the machine.
5) Attention! Before carrying out any maintenance on the machine, disconnect the spark plug wire and
consult the operator's manual.
1
Code number P5140663
1) Attention - Danger! Read the operator's manual carefully.
2) Never transport any load on slopes where angle is over 20°.
3) Do not mount on rear board.
4) Do not mount on bed and do not carry passengers.
Always replace safety decals whenever damaged or illegible. To obtain new decals, please refer
to the code number indicated below each of them.
Pag. 26

SAFETY DECALS

2
3
2
4
3
5
4
Minitransporter IBT-500 / H / D / DH