VOLTOMAT HEATING FH-109313.2 Bedienungsanleitung Seite 83

timer will be activated in 5 seconds without any other operation and then the digital display will show back the
room temperature.
Temperature: After the timer is set, press the button "
setting mode. You can press "
value will be shown on the digital display. The set temperature will be activated in 5 seconds without any other
operation and then the digital display will show back the room temperature.
Note:
1) After timer and temperature are set, the digital display will show the set time and the room temperature
alternatively. If you do not set the timer and only set the temperature, the digital display will show the room
temperature only.
2) Once the timer is counting down to 0 (not shown on digital display), the appliance will stop working
automatically and enter into standby mode.
3) Once the set temperature is reached, the appliance will stop working, as well as the swing function if you
have set before. Once the room temperature is lower than the set temperature by 2℃, the appliance will
resume working automatically, as well as the swing function if you have set before. If you have set the timer,
please note the time for standby mode will not be counted as the set time.
4) This appliance begins to sense the room temperature in 10 seconds after the appliance is turned on, so even
your set temperature is already above the current room temperature, the appliance will still work for 10
seconds and then turn off automatically.
4. Power setting button
Under working condition, you can press button "
and high heating power.
- Low heating power: Icon "
- High heating power: Icon "
5. Adjustment button
You can press button "
the corresponding timer / temperature value will be rapidly changed by 1H / 1℃ on the digital display.
6. ECO button
Under working condition, you can press button "
will illuminate on the digital display.
When appliance is in ECO mode, the temperature will be set at 22℃ by default. Under this condition, when the
room temperature is lower than 18℃, the high heating power works automatically; when the room temperature
is higher than 18 ℃ but lower than 22 ℃ , the low heating power works automatically. When the room
temperature reaches 22℃, the appliance stops working automatically and icon "ECO" shows on the digital
display.
ELECTRIC MEMORY FUNCTION
After use, switch off the appliance but not unplug it. Under this condition, if you turn on the appliance again, the
appliance will keep working with the functions set last time, except for the timer function.
" to adjust the temperature from 5 – 35℃. The corresponding temperature
" will be shown on the digital display.
" will be shown on the digital display.
" to adjust timer and temperature settings. Press and hold for more than 4 seconds,
" again, the appliance enters into the temperature
" to switch the power setting between low heating power
" to switch the appliance into ECO mode. The icon "
- 81 -
"